Decorative outdoor flower pots for the garden, can be made in a couple of days of available materials.
To use it is necessary to prepare: -Plastic bottle - 5 liters; -Small pieces of reinforcing mesh -metal bar -
Oil based paint sand. These are the manufacturing steps: 1. Cut one side of a plastic bottle, the neck of the threaded cap. 2. The bottle is placed on a flat surface, filled with moist sand.
Put more and to expand the capacity of the inner bottle. 3. fold the rod in the form of two (gooseneck) and fix it as shown in the photo El cuello de un cisne hecha de varilla metálica gruesa 4.Preparing the plaster with water and add a little sand, which remains as a putty. 5. Form the beginning of the neck. For this part it applies to the neck of the bottle and the rod
From the shape of the filling mouth, smoothing the line to wet brush
6. On the wall of the bottle with a spatula and a layer of plaster is placed, aplicar una capa deyeso de 2 cm en la parte exterior
aplicar una capa deyeso de 2 cm en la parte exterior 7. To make the two wings a wire mesh is used 8. Once the net is stuck, with wet hands put a "tail" of putty. 9. Wet hands spread the solution around the rod to form a neck. 10. In the course of the working rod wrapped with a wet bandage. 11. Due to the small mesh queue, also covering it with putty. 12. Remove all defects: add, if necessary, a layer, 13. After drying the mastic (2-3 days), the surface is sanded with sandpaper. 14. Poner en una capade pintura impermeable. 15. Swan cover with white enamel, with bright colors decorate the beak and eyes.